The black pearl model goes well with screw-in plumbing fittings in cast iron or rough black steel.
Create your suspension with the rosettes and sockets that suit you best.
This E27 lampholder is earthed, so you can use a grounding conductor. textile or pvc cable with 3 wires.
diy sleeve specificities:
- Material: Metal
- Diameter: 60mm
- Height: 55mm
- Thread: M10 1mm fine pitch
- Cable clamp: no
- Ground connection: Yes
- Bulb type: E27
How to dismantle a bulb socket?
E27 and E14 bulb sockets are easy to install for restoring or creating lamps and lighting fixtures.
These are fitted with a small metal tab that secures the socket to prevent unintentional unscrewing.
In order to dismantle the socket, please take the appropriate precautions by removing the power plug or if it is connected to the infrastructure, please lower the fuse that connects it and check that it is no longer supplied with voltage ⚡.
Using a flathead screwdriver, push the metal safety tab inside the socket where the bulb is located.
Once the tab has been pushed in, the socket can now be unscrewed.
Warning: before screwing the socket back in, it is essential to lift the tab to reset the safety device.
Used for DIY projects
- E27 double ferrule anthracite socket kit for cable
REF: MCFL0400125C2-1 - Kit E27 double ferrule chrome for cable
REF: MCFL0400123W8-1 - E27 double ferrule copper socket kit for cable
REF: MCFL0400120W8-1 - Kit E27 double ferrule brass for cable
REF: MCFL0400124W8-1 - Kit E27 double metal ferrule metal cable clamp
REF: MCFL0400200 - E27 socket kit, double metal ferrule, plastic cable clamp
REF: MCFL0400300-1 - Kit E27 double ferrule black pearl for cable
REF: MCFL0400122W8-1 - E27 double ferrule rust socket kit for cable
REF: MCFL0400128C2-1 - Kit E27 metal socket 90° elbow for fitting
REF: MCFA0000900W8 - E27 metal male socket kit for fitting
REF: MCFA0000800W8 - E27 metal socket kit for fitting
REF: MCFA0000600W8
There are no reviews yet.