Create your suspension with the rosettes and e14 lampholders that suit you best.
The socket is earthed, so you can use a grounding conductor. textile or pvc cable with 3 wires.
E14 DIY socket specifications:
- Material: Metal
- Diameter: 43mm
- Height: 57mm
- Thread: M10 1mm fine pitch
- Cable clamp: no
- Earth connection: Yes
- Bulb type: E14
How to dismantle a bulb socket?
E27 and E14 bulb sockets are easy to install for restoring or creating lamps and lighting fixtures.
These are fitted with a small metal tab that secures the socket to prevent unintentional unscrewing.
In order to dismantle the socket, please take the appropriate precautions by removing the power plug or if it is connected to the infrastructure, please lower the fuse that connects it and check that it is no longer supplied with voltage ⚡.
Using a flathead screwdriver, push the metal safety tab inside the socket where the bulb is located.
Once the tab has been pushed in, the socket can now be unscrewed.
Warning: before screwing the socket back in, it is essential to lift the tab to reset the safety device.
Il n'y a pas encore d'avis.